Nussbaum UNI-LIFT 2500, Инструкция по эксплуатации и документация

Страница: 25 / 45

Operating Instruction and Documentation
UNI-LIFT 2500
- 25 -
9.5 Initiation
Before the initiation a security check must be carried out. Therefore use the form: First
security check.
If the lift is installed by a competent person, he or she is to perform the security check. If the
operator installs the lift by him or herself, he or she must instruct a competent person to
perform the security check.
The competent confirms the faultless function of the lift in the installation record and the form
for the security check and authorises the use of the lift.
Please send the completed installation record to the manufacturer after installation.
9.6 Change of lift location
If the place of installation is to be changed, the new place has to be prepared in according to the
regulations of the first installation. The change should be performed in accordance with the
following points:
• Raise the lift to a height of about 1000 mm.
• Remove the cover of the tank.
• Remove the lifting arms.
• Lower the lift to its lowest position.
• Remove the oil from tank.
• Remove all electrical cables between the columns.
• Disconnect the power supply.
• Transport the automotive-lift to the its new location
• Install the lift in accordance with chapter 9 “ Installation and Initiation”.
Use new masonry-bolts, the used bolts can not be used again.
A security check must be performed before reinitiating by a competent person. Use
form “Regular security check”