Nussbaum UNI-LIFT 2500, Инструкция по эксплуатации и документация

Страница: 7 / 45

Operating Instruction and Documentation
UNI-LIFT 2500
- 7 -
1.Introduction
The document ”Operating Instruction and Documentation” contains important information about
installation, operation and maintenance of the lift.
To furnish proof of the installation of the automotive lift the form ”Record of Installation” must be
signed and returned to the manufacturer.
To furnish proof of the singular, regular and extraordinary check this documentation contains forms.
The forms should be used to document the checks. They should not be removed from this
documentation.
Every change of the construction and displacement of the automotive lift has to be registered in
the ”Master document” of the lift.
1.1 Installation and check of the automotive lift
Only specialist staff is allowed to do work concerning safety and to do the safety checks of the lift.
They are called experts and competent persons in this document.
Experts are persons (for example self-employed engineers, experts) which have received
instruction and have experience to check and to test automotive lifts. They know the
relevant regulations concerning both labour and accidents prevention.
Competent persons are persons who have acquired adequate knowledge and experience with
automotive lifts. They took part in training from the lift-manufacturer (servicing
technicians of the manufacturer or dealer are competent)
1.2 Information of Warning
To show danger and to show important information the three symbols below are used. Pay
attention to those passages, which are marked with these symbols.
Danger! This sign indicates danger to life. Inexpert handling of the described
operation may be dangerous to life.
Caution! This sign cautions against possible damage to the automotive lift or other
material defects in case of inexpert handling .
Attention! This sign indicates an important function or another important
note.