Operating Instruction and Documentation
Sprinter NT
- 22 -
The emergency lowering can only be performed by persons instructed to use the
lift. Please refer to the regulation „Lowering the vehicle“.
Every kind of external leakage must be removed.This is necessary particular
before emergency lowering.
The emergency lowering must be carried in this order. Ohterwise a malfunction
can lead it to damages or lead to danger for body and lives.
• Control the dangerous places of the lift and be sure that there are no objects or
people in the immediate area of the lift or on the lift.
• Before the emergency lowering process loose the electrical power supply.
• Loose and remove the plastic cover of the operating unit. (see pic.6)
• Loose the locknut of the
emergency lowering screws
(N1 & N2).
pic 6:
Position Y =
bore hole for the emergency lowering screw
• Open slowly ¼ turn the emergency lowering screw N1with a suitable tool.
Do not unscrew the screw!
• Control the dangerous places of the lift and be sure that there are no objects or
people in the immediate area of the lift or on the lift.
Attention: One platform will be lower approx. 5 cm. The lowering process stoped
if the screw is closed.
• Afterwards open a slowly little the emergency lowering screw N2.
Do not unscrew it.
• The emergency lowering starts. You can influence the lowering speed with this
emergency lowering screw.
• Lower the lift in the lowest position.
• Observe the complete process.
