Quick Lube HF
Nussbaum Automotive Solutions, LP | 1932 Jordache Court, Gastonia, NC 28052 | 704.864.2470 | Email:
|
www.nussbaum-usa.com
5
Pre-check low clearance or specially equipped vehicles for ample clearance to avoid damage to the vehicle
and/or lift.
Only trained personnel are to operate the lift.
No one is to stand within the working area (danger area) during vehicle lifting and lowering operations.
No one is to occupy a vehicle during any phase of lift operation.
No one is to climb onto the automotive lift when in a raised position.
The main electrical switch (when applicable) must be switched off and locked out/tagged out according to OSHA
Regulations before maintenance or repair work is performed on the lift.
The operator must continue to observe the vehicle and lift throughout the lifting or lowering operation.
Check the center of gravity of the vehicle if heavy parts, such as the engine are removed.
If heavy parts such as the engine must be removed, the center of gravity will change. Secure the vehicle before
removing parts to avoid the possibility of the vehicle becoming insecure.
Read ALL instructions before operating lift.
Care must be taken as burns may occur from touching hot parts.
Do not operate the equipment with a damaged cord or if the equipment has been damaged – until it has been
examined by a qualified service person.
To reduce the risk of fire, do not operate equipment near open containers of flammable liquids (gasoline).
Adequate ventilation should be provided when working on operating internal combustion engines.
Keep hair, loose clothing, fingers, and all parts of body away from moving parts.
Use only as described in this manual. Use only manufacturer’s recommended attachments.
ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant lenses, they are not safety
glasses.
SAVE THESE INSTRUCTIONS
5.2.
Safety Devices
Nussbaum has designed several safety features into each lift to ensure safe and efficient operations under a variety of
conditions. Warranties will be voided, and dangerous working conditions exist if any of the listed devices are altered
or disabled.
Pressure relief valve
Prevents over pressuring of the hydraulic system.
Two independent master-slave systems
Protects against unintentional lowering.
Hydraulic Flow Restrictors
Prevents excessive lowering speed.
Check Valve
Secures the vehicle against accidental lowering.
Hold-to-run controls
Protects against unsupervised operation
Lockable main power switch
Prevents unauthorized use of the lift
6.
Operating Instructions
DANGER! READ ALL OWNER’S MANUAL INSTRUCTIONS
BEFORE USING THE LIFT
6.1.
To Load Vehicle
Danger! The operating instructions must be followed when
operating the lift.
