Quick Lube HF
Nussbaum Automotive Solutions, LP | 1932 Jordache Court, Gastonia, NC 28052 | 704.864.2470 | Email:
|
www.nussbaum-usa.com
16
12.5.
Bleeding and Equalization of the Lift
Make sure there is no external leaking of hydraulic fluid. Use the handle to raise the lift to the highest position.
Once the lift reaches the maximum height, continue allowing the motor to run for approximately 30 seconds,
adding fluid if necessary.
This allows the Hyperflow system to circulate all air back to the hydraulic reservoir!
13.
Final Installation Checkout Instructions
1.
Review
Operation Instructions on pages 6-7.
2.
Perform
all steps as outlined in the Operation Instructions on pages 6-7 several times.
3.
Verify
all operations function properly and securely
.
4.
Demonstrate the operation of the lift to the owner/operator and review correct and safe lifting procedures
5.
Provide the complete lift documentation package to the owner for future reference.
6.
Complete
the Manufacturer’s Checklist below and
Review
with the Owner.
7.
Review
the terms of the warranty registration card.
8.
Complete and Return
the card along with a copy of the completed Manufacturer’s Checklist to:
Nussbaum Automotive Solutions, LP
1932 Jordache Court
Gastonia, NC 28052
Fax: 1-704-864-2476
Email:
If the lift raises abruptly from its lowest position, the
platforms are unequal. Also if the lift does not
completely lower, bleeding might be necessary
