Quick Lube HF
Nussbaum Automotive Solutions, LP | 1932 Jordache Court, Gastonia, NC 28052 | 704.864.2470 | Email:
|
www.nussbaum-usa.com
4
!!! In addition, it is the responsibility of the lift owner to provide and connect any
hydraulic hoses and necessary accessories for custom hydraulic hose runs to account
for the pit and work area layout. The Quick Lube HF lift comes from the manufacturer
with enough hydraulic hose to prepare lift for installation (see section 12.2), but
nothing more. It is the responsibility of the lift owner to provide all necessary
additional hydraulic hoses and components !!!
4.
Lift Operator Responsibilities
The lift operator must:
Read and understand all safety and warning instructions in the manual or affixed to the lift.
Be trained to operate and use the Quick Lube HF lift for its designed use.
Be familiar with accident prevention and basic labor safety regulations.
NOT allow unauthorized personnel to operate the lift.
Pay close attention to the danger and important information symbols shown below.
Carefully read all marked passages throughout this manual.
Danger! This sign indicates danger to life. Improper handling of
the described operation may cause serious injury or death.
Caution! This sign warns against possible damage to the
automotive lift or other material defects in case of improper
handling.
Attention! This sign indicates an important function or note.
5.
Safety Regulations
Danger! The Safety Regulations must be observed and strictly
adhered to while working with the automotive lift. Read the safety
regulations included with the lift documentation carefully before
working with the lift!
5.1.
Important Safety Instructions
The total weight of the lifted vehicle must not exceed 9,000 pounds.
The lift must not be installed in a hazardous location or in washing bays.
The lift must be checked by a service technician after initial installation and after repairs or changes have been
made to the lift.
The operating and maintenance instructions must be followed while working with the lift.
High density blocks must be positioned correctly.
