Nussbaum ATT HYMAX S 3000 Скачать руководство пользователя страница 38

Страница: 38 / 99

108

OPI_SMART LIFT 2.30 SL-2.35 SL-2.40 SL - HYMAX S 3000-S3500-S4000_V1.2_DE-EN-FR-ES-IT

Figure 7: Version without CE stop
3 potentiometer for Up Off
4 potentiometer for Down Off

Figure 8: Version with CE stop
1  potentiometer for Up Off
2  potentiometer for Down Off
3  potentiometer for CE stop
4  Warning signal generator

The maximum height from the upper edge of the

base plate to the upper edge of the lift rails, during

the change of the “bottom off” via the potentiom-

eter on the controls, must not exceed 695 mm.

The maximum

height from the

upper edge of the

base plate to the

upper edge of the

lift rails must not

exceed

695 mm

If improper settings are done on the

potentiometer, this can lead to mal-

functioning of the lift and even to dan-

ger for life and limb and permanent

damage to the lift and the vehicle on

it.

• Remove the operating unit on the operating col-

umn.

• If potentiometer 3 (for “Up Off”) is turned an-

ti-clockwise, the upper holding point is moved up-

wards and the lift stops later in the lifting process.

• If the potentiometer 3 (for “Up Off” is turned

clockwise, the upper holding point is moved

downwards and the lift stops earlier in the lifting

process.

• If potentiometer 4 (for “Down Off”) is turned an-

ti-clockwise, the lower holding point is moved

upwards and the lift stops earlier in the lowering

process.

• If the potentiometer 4 (for “Down Off”) is turned

clockwise, the lower holding point is moved

downwards and the lift stops later in the lowering

process.

In the following alignment work it must be abso-

lutely ensured that a block movement of the lift

is prevented. The potentiometer for the “Up or

Down Off” may only be fine-adjusted, meaning

the potentiometer is slightly adjusted, then the

lift is actuated. Repeat the procedure until the

desired end point of the lifting rails is reached.

Содержание ATT HYMAX S 3000




































































































Результаты поиска

Содержание ATT HYMAX S 3000

Отзывы:

Похожие инструкции для ATT HYMAX S 3000

Бренды по названию

Популярные бренды

Nussbaum ATT HYMAX S 3000, Руководство по эксплуатации, журнал осмотров

Результаты поиска

Содержание ATT HYMAX S 3000

Отзывы:

Похожие инструкции для ATT HYMAX S 3000

Бренды по названию

Популярные бренды