Nussbaum ATT HYMAX S 3000 Скачать руководство пользователя страница 35

Страница: 35 / 99

OPI_SMART LIFT 2.30 SL-2.35 SL-2.40 SL - HYMAX S 3000-S3500-S4000_V1.2_DE-EN-FR-ES-IT

105

LED displays for malfunctions of the lift

Bottom end position of the lift rails

Desired position of the lift rails

between the end positions

Top end position of the lift rails

Possible cause of fault

Operator side not plugged in. (P1 NOK)

Operator side not plugged in. (P2 NOK)

Operator and opposite side not plugged in. (P1 and P2 NOK)

Operator side not plugged in. (P1 NOK)

Operator side not plugged in. (P2 NOK)

Operator and opposite side not plugged in. (P1 and P2 NOK)

Operator side not plugged in. (P1 NOK)

Operator side not plugged in. (P2 NOK)

Operator and opposite side not plugged in. (P1 and P2 NOK)

Reverse switch turned to "Raise"

!Stop! UA1 illuminated UA2 illuminated “Raise” illuminates “Lower” illuminates

!*! K1 illuminated K2 illuminated UA1 illuminated UA2 illuminated “Raise” illuminated “Lower” illuminates

!Stop! “Raise” illuminates “Lowerer” illuminates UA1 illuminated

!Stop! “Raise” illuminates “Lowerer” illuminates UA2 illuminated

!*! K1 illuminated K2 illuminated UA1 illuminated UA2 illuminated “Raise” illuminated “Lower” illuminates

!Stop! UA1 illuminated UA2 illuminated “Raise” illuminates “Lower” illuminates

!Stop! OA1 continuous

ly illuminated UA2 continuous

ly illuminated “Raise” illuminates “Lower” illuminates

!*! K1 illuminated K2 illuminated UA1 illuminated UA2 illuminated “Raise” illuminated “Lower” illuminates

Reverse switch turned to "Lower"

!Stop! UA1 illuminated UA2 illuminated “Raise” illuminates “Lower” illuminates

!Stop! “Raise” illuminates “Lowerer” illuminates UA1 illuminated

!Stop! “Raise” illuminates “Lowerer” illuminates UA2 illuminated

!Stop! UA1 illuminated UA2 illuminated “Raise” illuminates “Lower” illuminates

!Stop! UA1 continuous

ly illuminated UA2 continuous

ly illuminated “Raise” illuminates “Lower” illuminates

UA1 illuminated UA2 illuminated “Raise” illuminated “Lower” illuminates

Comment: If only the two LEDs „Raise“ and „Lower“ illuminate and the lift can no longer be moved, then the lift is out of monitoring range

Legend: E.g. „UA1 illuminated“

LED for „Bottom off“ is illumina

ted.

E.g. „Raise illuminates“

LED for „Raise“ illuminates.

P1 NOK

Potentiometer 1 on the opera

tor side is not plugged in or supply line interrupted

P2 NOK

Potentiometer 2 on the oppo

site side is not plugged in or supply line interrupted

P1 or P2NOK

Potentiometer 1 on the opera

tor side or Potentiometer 2 on the opposite side is not plugged in or interrupt supply line.

and

NOK

Potentiometer

1 on the operator side

and Potentiometer

2 on the opposite side

are not plugged in or supply

line interrupted.

!*!

Warning: Lift only moves upw

ards, lowering is not possible: There is a risk that the lift block moves.

!Stop!

Lift does not move in the desi

red direction according to the actuation of the reverse switch, but remains stopped

Содержание ATT HYMAX S 3000




































































































Результаты поиска

Содержание ATT HYMAX S 3000

Отзывы:

Похожие инструкции для ATT HYMAX S 3000

Бренды по названию

Популярные бренды

Nussbaum ATT HYMAX S 3000, Руководство по эксплуатации, журнал осмотров

Результаты поиска

Содержание ATT HYMAX S 3000

Отзывы:

Похожие инструкции для ATT HYMAX S 3000

Бренды по названию

Популярные бренды