Nuova Simonelli TALENTO, Руководство по обслуживанию, Страница: 96 / 200

Edition 02 to 12/2013
9.10
SERVICE MANUAL
The washing solenoid valve is connected to:
A White silicon pipe coming from Cold milk
solenoid valve
B Y fitting of milk pipe going to the milk pump.
To remove the washing and air solenoids valve
for hot milk, the engineer needs to follow the
same instruction described in par. 9.2.
With a flathead screwdriver at the top left side
of the machine, adjust the air and therefore, the
milk foam:
1 Turn anticlockwise to increase the foam.
2 Turn clockwise to reduce the foam.
Operation should be performed while foamed
milk is being poured, i.e. press cappuccino bot-
ton.).
9.3 AIR REGULATOR FOR COLD
MILK (TALENTO SPECIAL
ONLY)
With a flathead screwdriver at the top left side
(rear part) of the machine, adjust the air and
therefore, the milk foam:
1 Turn anticlockwise to increase the foam.
2 Turn clockwise to reduce the foam.
This operation should be performed while cold
milk is being poured.
B
A
Fig. 29
1 2
Fig. 31
1 2
Fig. 30