2
1
1
2
3
4
40
PIPA lite series instructions
41
PIPA lite series instructions
1
- After child is properly secured in child
restraint, press child restraint on base and
listen for a click. Pull on child restraint to verify
installation.
DO NOT
allow child restraint or handle to
contact the vehicle interior (side of car door or
seat in front) when installed on base.
2
- To release the child restraint, squeeze the
carrier release button
(1)
located on the base
and then pull the child restraint up
(2)
.
3
- To remove the base, lift up on the vehicle belt
lock off.
4
- Unbuckle the vehicle belt and un-route the
shoulder and lap belt from the base.
Then remove the base.
