Installation
1
-
WARNING
Serious injury
or death can occur. The seat alone cannot be
installed in the vehicle. It must be installed with
the base.
Installation in an Aircraft
When used with the base,
This Restraint is
Certified for Use in Motor Vehicles and Aircraft.
Install the base on an aircraft by following the section
Installation Using Lap and Lap/Shoulder Belt
on page
36. It may be necessary to shorten the lap belt by
twisting it, to achieve a proper installation.
Installation on a Stroller
This infant carrier can attach to Nuna strollers as
well as other brands of strollers using adapters.
Please visit nuna.eu for more information.
Base Installation Using Rigid LATCH
(Lower Attachments)
2
- Place vehicle in park and on level ground.
3
- Position base in a forward facing vehicle seat.
Adjust base so bubble touches line.
4
- If necessary, use recline adjustment to position
bubble in level indicator to achieve correct
angle for installation. Recline adjustment locks
into position.
5
- To release recline adjustment, press down on
lock button located under base.
6
- If necessary, install rigid LATCH guides on
vehicle LATCH lower anchor bars.
1
2
3
4
5
6
30
PIPA lite series instructions
31
PIPA lite series instructions
