Shoulder Belts
1
- Tighten harness to fit snugly on child’s
shoulders. It is snug if you cannot pinch a fold
in the strap.
2
- Harness straps must be at or just below
shoulders.
3
- To adjust shoulder harness height, remove
child and loosen harness by pressing the
harness adjustment button
(1)
while pulling on
the harness strap
(2)
. The harness adjustment
button is located inside the slot on the seat
pad.
4
- Turn child restraint over and remove one
harness loop from metal splitter plate.
5
- Pull loose ends of harness loop out through
slots and place in correct slot.
6
- Repeat process for second shoulder harness
strap and then re-attach harness to splitter
plate.
1
2
1
2
3
4
5
6
23
PIPA lite series instructions
22
PIPA lite series instructions
