Numatic CRO 8055/100T, Инструкция пользователя

Страница: 17 / 28

17
Always ensure that the machine is switched off prior to any maintenance.
!
!
To clean the floor-tool, lower the Floor-tool then unscrew the retaining knobs and slide off of the floor-tool holding bracket.
Rinse the floor-tool assembly with clean water and refit.
Periodically the floor-tool blades should be examined and checked for wear and damage.
The blade removal is easy. Simply start by removing the four retaining pins (Fig.52), turn the
floor-tool over and separate the blade carrier from the body (Fig.53-54). Peel away the blades
from their locating lugs (Fig.55) and examine or renew as required.
Replacement is a reversal of the removal process.
53 54 55
52
4
2
3
1
5
Note: The blades are designed to be reversible, thus extending their useful working life.
Changing the Floor-tool Blades
Floor-tool overview
1. Floor-tool main body
2. Rear blade
3. Blade carrier
4. Front blade (slotted)
5. Retaining pins x 4