Numatic CRO 8055/100T, Инструкция пользователя, Страница: 11 / 28

11
= No Flow
= 0.5 L/min
= 1.0 L/min
= 1.5 L/min
= 2.0 L/min
= 3.0 L/min
IMPORTANT
Do not operate machine unless the operator manual has been read and fully understood.
! !
The machine is now ready to be driven to the cleaning site (see the quick set-up guide if necessary).
Before performing the cleaning operation, place out appropriate warning signs and sweep or dust-mop the floor.
When you have arrived at the cleaning site, lower the Floor-tool (see page 8) and the brush deck (see page 9).
Insert the key into the on / off switch and quarter-turn it
clockwise to the ‘ON’ (1) position (Fig.26).
The battery charge-level indicator will illuminate (Fig.27).
Set the water flow rate as required, depending on floor
type and level of soiling.
The vac shut off system fitted to your machine stops the
airflow when the top tank is full!
It does not shut the power off to the vac motor, the vac
motor will continue to run, but there is an audible difference
in the sound when the shut off system operates.
See Page 16 for more details on checking and cleaning
the shut off system.
Always ensure that the floor is pre-swept and
relevant safety signs are displayed.
! !
26 27
Machine Operation
Setting the Cleaning Controls
Waste-water Tank Full