Numatic CRO 8055/100T, Инструкция пользователя

Страница: 15 / 28

15
Always ensure that the machine is switched off prior to any maintenance.
!
!
After use, empty waste-water tank using emptying hose and flush-out with
clean water.
Next remove floor-tool vacuum hose ensuring you remove the U-bend clip
and flush out with clean water.
Next empty clean water tank, using emptying hose and again flush out with
clean water.
Before removing the separator, first pull off the connected hose (Fig.42).
Remove the separator and rinse using clean water (Fig.43).
The separator also has a sealing-rubber which should be examined at every
clean-down (Fig.44).
Note: The separator can be hung from either side of the top tank while you
maintain the machine using the clip on the front of the lid. (Fig.45).
A
B
C
A
B
C
42
43 44
45
When refitting the separator make sure you engage the tab (A) at the front of
the separator BEFORE pushing the separator down.
Refit the vacuum hose.
A
Machine Cleaning