Numatic CRG 8055/100T, Оригинальное руководство пользователя, Страница: 8 / 52

8
www.numatic.co.uk
Use handle grip when
raising or lowering the
top waste-tank.
Machine Set-up Guide
NOTE: DO NOT DEPRESS ACCELERATOR PEDAL WHILE SOFTWARE INITIALISES. The machine will not operate in reverse with the floor tool
lowered. The seat is fitted with a pressure sensor that disables the machine until an operator is seated.
PLEASE READ BEFORE COMMENCING ANY OPERATION AFTER THE REMOVAL OF ALL
THE PACKAGING, CAREFULLY OPEN AND CHECK THE CONTENTS.
! !
Turn the key to switch on the machine,
set lever to forward.
Set to slowest speed, depress accelerator and
drive off the palette using ramp provided.
Once in a safe location switch off machine.
! !
1 2 3
ENSURE THAT NO METAL OBJECTS COME INTO CONTACT WITH BATTERY TERMINALS
WHILE THE BATTERIES ARE EXPOSED.
WHEN INSERTING THE FIRST FUSE YOU MAY NOTICE A SPARK, THIS IS NORMAL.
Less Battery Models - Numatic International Ltd recommends using MK or Sonnenschein Batteries for the 8055 & 8072 machines
mentioned in this manual. For full battery specifications see page 22.
Lift top tank assembly to reveal battery
compartment, ensuring you use the handle
grip provided.
Fit battery fuse (contained in start-up pack)
into the battery fuse holder as illustrated.
(Fig. 1, 2, 3.)
Insert Key into ignition located on the
control panel.
NOTE: Wear suitable gloves when
inserting fuses.
CONTENTS
●
Owner Manual
●
Battery
Charging Lead
●
2 x Keys
●
40 Amp Fuse
●
30 Amp Fuse
●
20 Amp Fuse
●
10 Amp Fuse
●
4 Amp Fuse
●
2.5 Amp Fuse
●
Maxi Fuse Puller
Fuse Location