1
BOX CONTENTS
ARC3
IEC Power Cable
Quickstart Guide
Safety & Warranty Information Booklet
REGISTRATION
Please go to http://www.numark.com to register your ARC3. Registering your product ensures that we can
keep you up-to-date with any last-minute product developments and provide you with world-class technical
support, should you run into any problems.
GROUND RULES
1.
Make sure all items listed in the BOX CONTENTS section are included in the box.
2.
READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3.
Study the connection diagram in this guide.
4.
Place mixer in an appropriate position for operation.
5.
Make sure all devices are turned off and all faders and gain knobs are set to “zero”
6.
Connect all stereo input sources as indicated in the diagram.
7.
Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8.
Plug all devices into AC power.
9.
Switch everything on in the following order.
•
audio input sources (i.e. turntables, CD players, etc.)
•
mixer
•
last, any amplifiers or output devices
10.
When turning off, always reverse this operation by,
•
turning off amplifiers
•
mixer
•
last, any input devices
CONNECTION DIAGRAM
CD PLAYER
CD PLAYER
MIXER
RELAY CABLE
FADER START CABLE
FADER START
CABLE
POWER SUPPLY
AUDIO CABLE
AUDIO CABLE
LINE IN
LINE OUT
LINE OUT
