NUANCE PageControl Touch, Руководство пользователя

Страница: 23 / 29

In Mode 1
PageControl Consoles use Mode 1 communication exclusively
with Equitrac Professional Enterprise Edition, System 4, and
Equitrac Professional.
Depending on your Mode 1 Console configuration, you can use the
PageControl to make photocopies, scan documents, enter
disbursements, release MyPrint documents, and interrupt
transactions in progress.
Making Photocopies
To complete a photocopy transaction, perform the following procedure:
1
Ensure that the Console is in Copy mode.
a
Press the corresponding function key
(F1
,
F2
, or
F3)
for
MODE
on the screen
.
b
Press the corresponding number key for
COPY
.
2
Use the desired data entry method to enter accounting data in the required fields. See
Data Entry Options on page 2 - 5 for details.
Note: Edit data using the
BACK
key, as needed. Press
ENTER
after editing the code.
When all accounting information has been entered and verified, the Console unlocks
the photocopy device and displays the Ready screen.
3 Use the photocopier to make your photocopies.
4
If you want to start another transaction using the same User ID, press the
corresponding key for
NEXT
and enter accounting codes as required.
5
Repeat steps 2 through 4 as needed.
6
Press
END
when you finish your transaction at the copier.
Scanning Documents
PageControl Consoles support eCopy ScanStation devices, eCopy ShareScan OP, or
specific Xerox multi-function devices with scan enabled. To complete a scan transaction,
perform the following procedure:
1
Ensure that the Console is in Copy mode.
a
Press the corresponding function key
(F1
,
F2
, or
F3)
for
MODE
on the screen
.
b
Press the corresponding number key for
COPY
.
Performing Transactions:
In Mode 1
Making Photocopies
At a Glance...
Making
Photocopies Scanning
Documents Entering
Disbursements
Releasing MyPrint
Documents
Interrupting a Transaction
3 - 2