NuAire LabGard NU-543-300E, Руководство по эксплуатации и обслуживанию

Страница: 57 / 72

OM0284 Page 57 of 72
Rev 2 July/2021
8.2 Option Parameters
The option parameter menu allows A QUALIFIED TECHNICIAN to configure several different optional parameters per the
menu below.
To enter the service parameter menu, perform the following:
•
Press and hold key, then press ENT ↑ and ↓ keys sequentially releasing the key after the
3 key sequence.
The following service parameter display should appear
Navigation through the service parameter menu is the same as the operator menu.
•
Press ↑ on ↓ keys to select a menu item which will be highlighted inversely. Menu selection moved in a
round robin pattern.
•
Press ENT key on a selected menu item will either:
5) Drill further down the menu tree
6) Allow editing of the item value which will now be highlighted.
o
Press ↑ or ↓ key to change the selected value
o
Press ENT key to accept the change
o
Press key to cancel the change
•
Press key to back up one level or repeated times to return to normal run or standby mode.
To enter the option parameter menu, you must first enter the service parameter menu.
Each parameter sub-menu will be described as well as the display will the default conditions as shown.
Option Parameters
Sync Outputs with Blower
Function Options
Blower Options
Auto Decontamination
Service Parameters
Configuration
Setpoints
Calibration
Options