NuAire LabGard NU-543-300E, Руководство по эксплуатации и обслуживанию

Страница: 37 / 72

OM0284 Page 37 of 72
Rev 2 July/2021
Cabinet Auto Decontamination
Use the following procedure to allow the cabinet blower to automatically run at programmed intervals
during the decontamination process.
To enter the service parameter menu, perform the following:
•
Press and hold key, then press ENT ↑ and ↓ keys sequentially releasing the key after the
3 key sequence.
The following service parameter display should appear.
•
Press ↑ or ↓ keys to select option menu item.
•
Press ↑ or ↓ keys to select Auto Decontamination menu item.
Enter decon cycle parameter information below and proceed to initiate the decon cycle for both the
decontamination system and cabinet.
Total duration is the total automated decontamination cycle time, so both the cabinet Auto
Decontamination time duration and the automated decontamination system cycle time are sequenced
and run together.
Blower run time is the length of time the blower will run during and of the (4) possible blower start times.
Blower start schedule is the start time of (4) possible blower start times during the decon cycle.
Service Parameters
Configuration
Setpoints
Calibration
Options
Option Parameters
Sync Outputs with Blower
Function Options
Blower Options
Auto Decontamination
Auto Decontamination
Total duration: (hh.mm) 3:00
Blower run time: (mm.ss)
1:00
Blower start schedule
Initiate decon cycle
Blower Start Time
Start blower at: 1:00
Start blower at: 1:30
Start blower at: 2:00
Start blower at: 2:30