Nu-Tek UT1032, Инструкция по эксплуатации, Страница: 13 / 24

13
The device is manufactured through complete quality assurance system. If
your device does not seem to be operating correctly, refer to the chart
below to determine what may be wrong. Should none of these measures
correct the problem, the device should be serviced.
Problem Possible Cause Solution
POWER LED
fails to
light up
POWER LED is
performing
normally,
but no output
function occurs.
TROUBLESHOOTING
The plug of the adaptor is
not inserted into the
socket properly.
The DC plug of the
adaptor is not inserted
into the DC receptacle on
the device correctly.
Did not press the ON/OFF
button.
Insert the plug of the
adaptor into the socket
again.
Connect the adaptor
with the device again
correctly.
Press the ON/OFF
button again.
Output intensity button
setting is incorrect.
Please make sure and
set it again.
When not in use, store the device with the adapter in a dry room and protect
it against extreme moisture, heat and direct sunlight. Never place any heavy
objects on the storage case.
●
Storage and transportation conditions:-20°C-55°C;
10%-93%; 700-1060hPa
STORAGE CONDITIONS