The Rehab-series should only be operated with the original mains cable specified in the list
of contents delivered.
Operating the device with any other mains cable can lead to increased emissions or reduced
interference immunity of the device.
The device should not be used when placed immediately next to or stacked on top of other
devices. If operation is necessary when immediately next to or stacked on top of other
devices, the device should be monitored to ensure it is operating as intended in this arrange-
ment.
Guidelines and manufacturer's declaration – electromagnetic interference
The REHAB SERIES device is intended for operation in an electromagnetic environment
as indicated below. The customer or user of the REHAB SERIES unit should ensure that
it is operated in such an environment.
Interference tests
Conformity
Electromagnetic environment guideline
RF emissions according to CISPR 11
RF emissions according to CISPR 11
Harmonic emissions according to
IEC 61000-3-2
Voltage fluctuation emissions and
flicker according to IEC 61000-3-3
Group 1
ClassA
Class A
Conforms
The Rehab-series device uses RF energy
solely for its internal functioning. It RF
emission is therefore very low and it is
unlikely that this will cause interference
to neighbouring electronic Rehab-series
The Rehab-series device is suitable for use
in all establishments other than domestic
and those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
purposes.
82
Rehab-Series
