9.3 Maintenance
9.3.1 User Maintenance
9.3.1.1 Technical Maintenance
On request a service manual can be made available containing: spare part list, descriptions,
calibration instructions and other information which will assist the user’s qualified technical
personnel to repair those parts of the equipment which are designated by the manufacturer
as repairable.
CAUTION:
Electrical safety of the device relies on a properly earthed electrical connection via the
power cord. It is therefore necessary to have this connection checked annually.
To ensure continued compliance with the 21 CFR 1050.10 standard, this unit should
be adjusted and safety tested once each year. Procedures laid down in the service
manual should be followed. This may be carried out by your supplier, or by another
agency, authorized by the manufacturer. It is also recommended that a service history
record is maintained. In some countries this is even obligatory.
Use of controls or adjustments or performance of procedures other than those speci-
fied herein may result in hazardous exposure to ultrasonic energy.
116
117
118
Warning
tone
Warning
tone
Warning
tone
Vacuum adsorption
module e leak
Device inside
Overtemperature
Battery overtemperature
There probably is
a leak in the vacuum
system.
System is too hot.
Battery is too hot.
The operation
is invalid
System stop
output
System stop
output
70
Rehab-Series
