NTI UNIMUX-nXm-UHD Скачать руководство пользователя страница 11

Страница: 11 / 69

NTI UNIMUX MULTI-USER KVM SWITCH

Additional Features

•

A single CPU can be used by one or shared by several users.

•

Any USB type user device can control any USB CPU (Windows, MAC, and SUN platforms).

•

Power cycle circuit control allows the UNIMUX switch to be powered OFF, then ON, at any time without affecting the attached
CPUs. (This assumes that the CPU supports hot plugging.)

•

Security features can be enabled on a user port by user port basis.

•

A microprocessor is dedicated to each CPU, preventing connected CPUs from locking up and allowing all CPUs to boot at
the same time.

•

Any user device cable can be hot-plugged.

•

The front panel LCD indicates the CPU to which each user is connected.

•

10 configurations can be saved in memory by the user for instant setup recall.

•

No dip-switches or jumpers necessary to configure.

•

Video formats up to 2048X1536 can be displayed from all platforms.

•

Users can control the switch using the

On Screen Display

(OSD)

•

RS232 control

allows control of the switch with one CPU serial port. (Windows-based software is provided.)

•

Matrix Switcher's Control Program

provides easy and powerful graphical control of matrix switches through the RS232

interface. (Windows only.)

Содержание UNIMUX-nXm-UHD






































































Результаты поиска

Содержание UNIMUX-nXm-UHD

Отзывы:

Похожие инструкции для UNIMUX-nXm-UHD

Бренды по названию

Популярные бренды

NTI UNIMUX-nXm-UHD, Инструкция по установке и эксплуатации

Результаты поиска

Содержание UNIMUX-nXm-UHD

Отзывы:

Похожие инструкции для UNIMUX-nXm-UHD

Бренды по названию

Популярные бренды