Trinity
│
Installation and Operation Instructions
Ti Series
12
Labeling and Identification
– Two Pipe
Side Wall
Labeling and Identification
– Optional Kit
Figure 3-6
Figure 3-7
Two-Pipe Side Wall Termination
Concentric Vent Termination Kit
Labeling and Identification
– Low Profile Termination Kit
Figure 3-8
Low Profile Termination Kit
Warning Plate
Exhaust
Vent
Vent
Screen
Vent Screen
Insert vent
screen into
socket joint of
termination
elbow. Secure
by cementing
a short piece
of venting into
the socket.
Venting
Vent
Screen
Gas Vent Directly Below
Keep Free of Obstructions
Combustion
Air-Inlet
Venting
Fully Assembled
and Installed
Air-Inlet
Piping
Exhaust
Venting
Approved Orientation
Base
Cap
Low Profile Termination Kit
The vent /air-inlet pipes are field
supplied. Vent screens are build
in. Major components provided in
Low Profile Kit include: base, cap,
s.s. screws, and plastic anchors.
Concentric Vent Termination Kit
Insert Vent Screen into the End Cap from the outside,
followed by a short piece of vent pipe to retain the Vent
Screen in place. The End Cap must be secured to the
Exhaust Vent via cement or stainless steel screws. Refer to
Figure 4-12 for more details.
Air Inlet Pipe
Exhaust Vent
Vent Screen
(Included w. boiler)
End Cap
Retaining Exhaust
Pipe Piece
