8
Operation
1. If the sensor includes an AC adapter, connect the AC adapter to a 120VAC power source. If the sensor is powered by an
ENVIROMUX, the sensor will be powered any time the ENVIROMUX is ON.
The sensor has an
LED
that
will illuminate
to indicate the sensor is in alert.
2. Configure the ENVIROMUX to report signals from the connected dry contact sensor as
alert
detection
occurs
. (Refer to
ENVIROMUX manual for details on configuration- see also examples on next page.) When
an alert condition
is detected, the
switch terminals on the
sensor
will open to generate an alert message from the ENVIROMUX.
Example of sensor configuration in ENVIROMUX-2D, 5D, 16D or ENVIROMUX-MINI-LXO using DIGITAL IN
terminals
The “Normal Status” for the ENVIROMUX-IMD-
TAA2 should be set to “Closed”.
Содержание enviromux-imd-taa2
Страница 1: ......
Страница 2: ......
Страница 3: ......
Страница 9: ...9 Example of sensor configuration in ENVIROMUX 16D 5D 2D using RJ45...