NTI enviromux-imd-taa2, Руководство пользователя

Страница: 4 / 10

4
Wiring and Configuration Instruction
This ENVIROMUX Sensor is intended for connection to an NTI ENVIROMUX-MINI-LXO /-16D / -5D/-2D for use in detecting changes
in the environment . When properly connected, the sensors will provide signals to the ENVIROMUX that with proper configuration will
result in alert messages being sent to the administrator of the ENVIROMUX. The sensor has screw terminals for easy user
connections.
The sensors used with the ENVIROMUX-16D/-5D and -2D can be powered by the ENVIROMUX and don’t require an external power
supply. Sensors models without the “–P” are used for these models (i.e. ENVIROMUX-IMD).
Sensors used with the ENVIROMUX-MINI-LXO/-MICRO-T(RHP) or ENVIROMUX-1W require an external power supply. To include a
12VDC AC adapter order model with “-P” (i.e. ENVIROMUX-IMD-TAA2-P).
Access Screw Terminals
See the image below for instruction to open the case to access the screw terminals.
Installation-with External Power Supply (ENVIROMUX-MINI-LXO)
1. Connect two 16-26 awg wires (not supplied) from any set of dry contacts (see below) on the ENVIROMUX-MINI-LXO (set 1-5).
2. Connect the other end of those two wires to the switch terminals “N.C” on the sensor. (Apply one wire to each terminal, it doesn’t
matter which wire goes on which terminal.)
Loosen screw
(approx. 4-5 turns) to
open case
ENVIROMUX-IMD-TAA2