NTEK DOORPAD, Руководство по эксплуатации продукта, Страница: 18 / 44

17
Product Installation
Product Preparation
Installation
Upon knowing that your DoorPad is complete:
Plan your installation and wiring.
Before starting the installation
process, plan first how your
device will be powered, the
network connection type
(wireless or LAN) and what
devices you plan to integrate
with DoorPad. Decide whether
the wiring should go through
the wall or pass underneath the
device.
1. Place the Metalic Wall
Mount against the wall and
mark through the screw holes
and wire outlet (through-
wall wiring) using a pencil or
marker.
2. Drill through the markings
using the appropriate drill bit,
depending on the type of wall.
For concrete or brick walls,
the screw holes should just be
wide enough that the provided
screw anchors will fit through
tightly and not loose.
Figure 6.1
Figure 6.2
Figure 6.3