nStor CR8e, Руководство пользователя, Страница: 82 / 92

Technical Information
Connectors and Jumpers
70
CONNECTORS AND JUMPERS
This section provides information about the connector pinouts on the
termination interface card and jumper settings on the backplane printed circuit
board for your nStor CR8e subsystem.
Connectors
Located on each termination interface card are two VDH SCSI connectors. They
provide the input/output interface from the subsystem bus to the RAID controller
or host adapter card.
CR8e (continued)
Safety Requirements UL1950
CSA C22.2 #950
TUV/EN60950
CE Compliance (EMC) 89/336/EEC EMC Directive
Shock
Operating
Non-Operating
1.0 G, 2 - 50 ms
20.0 G, 2 - 20 ms
Vibration
Operating
Non-Operating
5 - 500 Hz, 0.25 G (pk to pk)
5 - 500 Hz, 1.0 G (pk to pk)
Signal Name Pin
Number
Conductor
Number
Signal Name Pin
Number
Conductor
Number
+DB(12) 1 1 – DB(12) 35 2
+DB(13) 2 3 – DB(13) 36 4
+DB(14) 3 5 – DB(14) 37 6
1 34
35 68
VHD/HD 68-pin SCSI
P-Cable Connector
Pin-out