nStor CR8e, Руководство пользователя, Страница: 70 / 92

Maintenance
Replacing a Power Supply
58
5 Insert the drive into the drive bay by aligning its rails into the drive bay slots,
component side toward the right (rack) or down (tower). Seat the drive by
applying pressure with your thumb to the front of the drive.
6 Press the Drive Latching Clips until they “snap” into place.
7 Using the packaging materials from the replacement disk drive, repackage the
failed drive and return it to nStor Corporation, refer to the nStor Resource
Guide for information on “
Obtaining a Return Material Authorization .”
Replacing a Power Supply
CAUTION: Power supplies must be replaced by qualified service personnel only.
1 Using the Operator Control Panel, identify the failed power supply.
Select “Hardware Menu” from the Main Menu and choose “Component
Status.” For more information, refer to “Component Status” on page 43.
Power Supply #1
“DC Good” LED
Power Supply #2
Power Supply #3