nStor CR8e, Руководство пользователя, Страница: 55 / 92

Using the CR8e
Main Menu
43
Component Status
The Component Status menu provides a view of the power supplies and fans
installed in the CR8e and their current status. Component status can be either
OK, Missing, or Failed.
1 If you receive a Hardware Error, access the Main menu and choose the
Hardware Menu .
2 Use the up/down arrow buttons to select Component Status and press the
Enter button.
3 Use the up/down arrow buttons scrolling to view the complete list of the
components.
Fan speeds are expressed in % of RPM. The bus configuration will be
displayed for the type of Configuration Module you have installed.
4 Press the Escape button to return to the previous menu or the Menu button to
return to the Main “Status OK” screen.
Configuration Info
This selection provides information about the subsystem’s configuration
including such items as the installed feature cards and firmware information.
NOTE: Slot “x” Cards are the feature cards located on the subsystem rear panel.
Slot 1 is the lower/left feature card slot and slot 2 is the upper/right
feature card slot.
MENU ENTER ESCAPE
PWR SPLY 2...OK
PWR SPLY 3...MISSING
FAN 1...........FAILED
PWR SPLY 1...OK
nStor
MENU ENTER ESCAPE
CONFIGURATION INFO
POST RESULTS
COMPONENT STATUS
nStor
INTERNAL TEMP
MENU ENTER ESCAPE
BUS CONFIG...SINGLE
FAN 2...........OK
FAN 1 SPEED..79%
FAN 2 SPEED..79%
nStor