nStor CR8e, Руководство пользователя, Страница: 51 / 92

Using the CR8e
LED Descriptions
39
All drive LEDs will illuminate solid green regardless of the error conditions. The
CR8e needs to be serviced if this error occurs consistently and is not cleared by
cycling the power on the CR8e. Contact nStor Technical Support.
NOTE: The CR8e subsystem will not respond to the firmware if this error occurs.
LED Descriptions
Use the following LED matrix to interpret the CR8e LEDs when the SAF-TE card
is installed and an accompanied SAF-TE compliant RAID controller is installed.
SAF-TE LED Matrix
AT POWER UP Steady Green Steady Green
DRIVE READY
NOT ASSIGNED Blinking Green Steady Green
DRIVE READY
ASSIGNED Steady Green Steady Green
HOT SPARE READY
ASSIGNED Blinking Green Steady Green
DRIVE ERROR
NOT ASSIGNED Blinking Green Steady Amber
DRIVE ERROR
ASSIGNED Blinking Amber Steady Amber
Blinking Green UNASSIGNED DRIVE
Steady Green ASSIGNED TO ARRAY
ARRAY IS FAULT-TOLERANT
ARRAY IS IN REBUILD MODE
ARRAY HAS A FAILED DRIVE
HOT SPARE
ALL EMPTY BAYS
FAILED DRIVE
REBUILD MODE
Steady Green
Steady Amber
Steady Amber
FIRMWARE CHECKSUM ERROR Alternating Amber and Green
Blinking Green
Off
Blinking Amber
Steady Amber (all drives)
ARRAY CRITICAL
REMAINING GOOD DRIVES Steady Amber Steady Amber
HOT SPARE
REBUILD MODE Steady Amber Steady Amber
DRIVE MANUALLY
DISABLED Blinking Amber Steady Amber
STATUS LEDs
STATUS LEDs
CHANNEL MODE LEDs
CHANNEL MODE LEDs