IPCAM User Manual
7
3.1 Hardware installation
You should install your IP Camera's hardware according to the following step in order to
make sure the IP camera work
s
properly. Especially, pay attention to IP camera's installation
environment.
1)
IPCAM. Plug DC adapter with IP camera
I.Note: Please use
supplied or approved
D
C
adapteron of IP camera. Using DC
adapter without any certificate, may destroy IP camera.
2) Plug cable
from
IP camera, and
the
other
end
of cable should connect with DSL or router. In
addition, make sure power of IP camera work
s
properly and IP camera and PC are in the same
Subnet
Mask
Picture 4 Network connection sketch map
3)
When you use
the CPT2IP for
the first time,
Unit should be set for DHCP
automatically. (Before using, please make sure " DHCP" Server function in LAN's
router has been opened, or Server system open " DHCP" Server function) It is very
