NRG INSTRUCTIONS
Windcube PV Trailer
Windcube_PVTrailer_ModerateClimate_Instructions
Rev. 2
[email protected] | Page 5
27 March 2018
b.
Swing out and install struts; choose an angle based on season or location (50°, 33°or 28°).
5.
Tighten all bolts hand tight with wrench.
6.
Mount PV panels
a.
Remove ratchet straps.
b.
Remove Shipping Bracket from top of stacked PV panels.
NOTE: Remove PV panels one at a time, and use a bungee cord to
support them against the wall.
c.
Lift the first PV panel into position.
NOTE: The PV panels should be installed vertically with the cables and connectors on the top side. There
are two posts (as seen on the right) underneath the lower side that allow the panel to sit on the bottom
crossbar.
d.
Line up bolt holes and install bolts.