background image

Using the air compressor

      WARNING: Fire Hazard

      The compressor is designed for short term operation only.
      Operating the compressor over an extended period of time will cause the compressor 
      unit to overheat, which could lead to fire.
      Allow the compressor to cool down for 10 minutes after each 10 minutes of 
      continuous operations.

      WARNING: Fire Hazard

      Do not leave the compressor unattended while in operation. Keep out of reach of  
      children.

      WARNING: Risk of Personal Injury or Damage to Equipment

      Do not exceed the recommended pressure of either the compressor or the object 
      being inflated. The compressor is capable of inflating to 250 PSI. If the recommended 
      pressure is exceeded, an explosion may result.

      WARNING: Risk of Personal Injury or Damage to Equipment

      If the Powerpack shuts off due to an over-temperature conditions, turn OFF the 
      Compressor switch and allow the compressor to cool for 15 minutes before 
      re-starting. If the power switch is not turned off, the compressor will automatically turn 
      itself on when it reaches an acceptable operating temperature.
      If left unattended it is possible that the unit can over-inflate the object being inflated  
      and create an explosion hazard.

      CAUTION: Equipment Damage

      The Powerpack cannot be used to inflate large capacity inflatables such as float  
      tubes, large air mattresses, transport truck tires, and inflatable boats. These types of 
      products require extended inflating times which may damage the compressor.

Inflating Tires

      CAUTION: 

If the pressure gauge on the compressor indicates more than twice the recommended 
pressure for the object you are inflating and you have only started to inflate the object, the 
valve connector is incorrectly connected to the valve stem. This may damage the 
Powerpack. Remove and reattach the valve connector to the valve stem.
To inflate your vehicle, motorcycle, or bicycle tires:
1. Locate Valve Connector.
2. Remove from storage and uncoil hose. 

16.

Содержание 450W FLEX

























Отзывы: