background image

22.

11. WARRANTY

One Year Limited Warranty Program

NPower warrants this product for one year limited against any defects in materials or 
workmanship. The defective products will be replaced and repaired at no charge in 
either of one year.
This warranty lasts for 12 months from the date of purchase at the point of sale to you. 
This warranty does not apply where the product has been misused, improperly 
installed, physically damaged or altered, either internally or externally, or damaged 
from improper use.
NPower will repair or replace the defective product free of charge. Proof of purchase is 
required. Warranty term is not extended if NPower repairs or replaces a product. 
NPower owns all parts removed from repaired products.
To qualify for the warranty, make sure the product has not been disassembled or 
modified without the prior authorization. If you require warranty service with your 
product, please return it to the place of purchase along with a copy of your dated proof 
of purchase or call customer service at 800-222-5381 for details.

        Note: Warranty does not apply to battery.

       Note: Any damage caused by the battery is to be referred to the battery  

       manufacturer.

Содержание 450W FLEX

























Отзывы: