NPK Genesis GXT 665R Скачать руководство пользователя страница 30

Страница: 30 / 72

Genesis GXT Mobile Shear

GENERAL OPERATION INSTRUCTIONS

Cutting Larger Materials

When cutting larger materials the shear jaw stalls just before cutting.

Suspend the material on the prepared pile, open the jaw and position the material as close to

the throat as possible. Without pushing down on the material with excavator force, rapidly close

the jaw on the material. Using the speed of regeneration can improve performance when cutting

larger materials.

Chatter While Cutting

If the shear starts to chatter while cutting, back out of the cut and reposition at a different spot.

Chattering is an indication that material is jamming between the piercing blades and guide blades

or between the upper and lower cutting blades. This indicates that blade maintenance needs to be

performed immediately. Worn blades and improper blade gaps are usually the cause.

Insufficient piercing blade gaps will also cause this, as the blades and parent material of the jaws

are subject to thermal expansion from cutting friction. The tighter the blades run, the hotter they

get and the more they expand. Piercing blades and guide blades are the most susceptible to this

and will show blue streaking on their corresponding faces. In some cases, they will get so hot that

surface cracks and spidering occur. As this happens, it will spread the lower jaw and increase

gaps between the primary and secondary blades, causing thin material to jam between them.

Another key area to watch is the opening between the guide blades. Be aware of material that

may get into this opening before the piercing blade moves into this space, as it will be wedged

between the piercing blades and guide blades.

Most jamming conditions can be prevented if the operator pays attention to the sound and

vibration that is associated with a jam. Remember that because of the rod-to-bore ratios of

displacement on the shear’s hydraulic cylinder piston, the shear has half the force on jaw open

compared to jaw close. So if the attachment is jamming while closing, it won’t have enough retract

force to open.

Содержание Genesis GXT 665R









































































Результаты поиска

Содержание Genesis GXT 665R

Отзывы:

Похожие инструкции для Genesis GXT 665R

Бренды по названию

Популярные бренды

NPK Genesis GXT 665R, Инструкция по безопасности и эксплуатации

Результаты поиска

Содержание Genesis GXT 665R

Отзывы:

Похожие инструкции для Genesis GXT 665R

Бренды по названию

Популярные бренды