© 2020 Genesis Attachments, LLC
Genesis GSD Grapple 9
Know the Work Area
Check clearances in the work area. Keep all bystanders at a safe distance. Do not work under
obstacles. Always check your location for overhead and buried power lines or other utilities before
operation.
Check ground conditions. Avoid unstable or slippery areas. Position the carrier on firm level
ground. If level ground is not possible, position the carrier to use the attachment to the front or
back of the carrier. Avoid working over the side of the carrier.
To reduce the risk of tipping and slipping, never park on a grade exceeding 10% (one-foot rise
over the span of a ten-foot run).
Starting Procedure
Before operating, walk completely around the equipment to make certain no one is under it, on it
or close to it. Keep all bystanders at least 75 feet away from the area of operation and equipment
movement. Let all other workers and bystanders know you are preparing to start. DO NOT operate
until everyone is clear.
Always be properly seated in the operator’s seat before operating any carrier controls.
To start:
3
Make sure all controls are in the center (neutral) position.
3
Be properly seated.
3
Slowly operate all functions to check for proper operation and to bleed air from the hydrau-
lic system.
To shut down:
3
Return your Genesis attachment to a rest position on the ground.
3
Shut off the carrier engine.
3
Work controls in all directions to relieve hydraulic pressure, per excavator manufacturer’s
instructions.
!
WARNING
Serious injury or death could result if warnings or
instructions regarding safe operation are not followed
properly.
OPERATIONAL SAFETY
