background image

© 2020 Genesis Attachments, LLC

Genesis GSD Grapple

12

OPERATIONAL SAFETY

IMPORTANT:

 Concrete and masonry products contain silica sand. 

Quartz, which is a form of silica and the most common mineral in the 

Earth’s crust, is associated with many types of rock.

Some activities that may have silica dust present in the air include 

demolition, sweeping, loading, sawing, hammering, drilling or planing of 

rock, concrete or masonry.

It is recommended to use dust suppression (such as water) or dust col-

lection (such as a vacuum) along with personal protective equipment if 

necessary during the operation of any attachment that may cause high 

levels of silica dust.

Prioritized Oil Flow

Equipment operators must ensure there is prioritized oil flow to the main valves in overhead op

-

erations or high reach conditions.

Emergency Situations

Always be prepared for emergencies. Make sure a fire extinguisher is available. 

Be familiar with its operation. Make sure to inspect and service the fire extinguisher 

regularly. Make sure a first aid kit is readily available.

Unsafe Conditions

Do not operate if an unsafe condition exists. Stop operation immediately, shut down the machine 

and report the unsafe condition to the proper authority. Equipment operation and maintenance 

practices directly affect your safety and the safety of those around you. Always use common 

sense while operating and be alert to unsafe conditions.

Crystalline Silica Dust

It is recommended to use dust suppression, dust collection and if necessary, personal protective 

equipment during the operation of any attachment that may cause high levels of dust.

!

DANGER

Exposure to respirable crystalline silica dust along with 

other hazardous dusts may cause serious or fatal respira-

tory disease.

Содержание Genesis GSD 10






























Отзывы: