Noyes OFL 100 Mini-OTDR, Руководство по эксплуатации

Страница: 7 / 39

2
CAUTION: Use of controls or adjustments other than those
specified herein may result in hazardous radiation exposure.
The OFL 100 is a CLASS 1 LASER PRODUCT.
It is important to keep all optical connections and surfaces free
from dirt, oils, or other contaminants to ensure proper operation.
Proper cleaning techniques must be performed on fiber
connectors, connector adapters, etc., before conducting any
test procedures that are outlined in this manual. Please refer
to the section on maintenance for more information on cleaning
methods. Scratched or contaminated connectors can reduce
system performance. Always replace protective dust caps when
available.
1.3 Recommended Accessories
Jumper cables are required to interface the OFL 100 to the
fiber under test (be certain the jumper cables used are the
same core/cladding size as the fiber under test). One end of
the jumper cable must interface to the front panel connector on
the OFL 100. The other end can be any number of styles,
allowing connection to different systems. Various cable styles
and lengths are available from Noyes Fiber Systems.
A supply of industry approved optical cleaning pads would be
helpful to maintain optical connectors. Also, a can of filtered
compressed air is useful for blowing contaminates out of
connector adapters.