125kHz
DC
12
~
400V
±
2
.
5
%;
AC
12
~
400V
(
50
~
60Hz
) ±
2
.
5
%
LCD, with function display and column chart
Max. 400V AC/DC
CAT
III
300V
pollution degree
2
Power
consumption
F
0
.
5
A
500V
,
6
.
3x32
mm
Range of
temperature
0°C ~ 40 °C, with maximum relative humidity
of 80% (non-condensation)
-20°C ~ 60°C,with maximum relative humidity of
80% (non-condensation)
Max. 2000m
Weight
Depth of tracking
The depth of tracking depends on the material and
specific applications
Cable
locating
mode
About 0~1m
About 0-0.5m
Up to 2.5m
About 0~0.4m
3.7V 1400 mAh Lithium battary
Power
consumption
Range of
temperature
0°C ~ 40°C,with maximum relative humidity of
80% (non-condensation)
-20°C ~ +60°C,with maximum relative humidity of
80% (non-condensation)
Max. 2000m
Weight
Output signal
External voltage
identification range
Display
External voltage's
dielectric strength
Overvoltage type
Power supply
MIN current
MAX current
Fuse
In work
In storage
Altitude
Dimensions (HxW*D)
Single pole
application
Dual-pole
application
Single loop line
Grid voltage identification
Display
Power supply
MIN current
MAX current
In work
In storage
Altitude
Dimensions (HxWxD)
3.7V 1400 mAh Lithium battary
80mA
300mA
156 x 80 x32 mm
235g
with
b
attary
LCD, with function display and column chart
100mA
300mA
226 x 73 x29 mm
235g
with
b
attary
25
26
4. OTHER FUNCTIONS
4.1 Voltmeter function of the transmitter
If the transmitter is connected to a charged circuit and the external voltage is higher than
12V, the lower left part of the monitor of transmitter shows current value of voltage, and
standard symbols are used to distinguish AC and DC circuits (see
in the interface
displayed on the transmitter), and the upper part of the monitor shows a lightning symbol
with a triangular frame (see in the interface displayed on the transmitter). The range
of identification is 12~400V DC/AC (AC: 50~60Hz).
4.2 Flashlight function
Press the flashlight button
on the transmitter or flashlight button on the receiver
to turn on the flashlight function, and press it again to turn off the flashlight function.
4.3 Backlight function
Press the backlight button on the receiver to turn on the backlight, and press it again
to
turn off the backlight.
Long press the backlight button on the tranmitter to turn on the backlight, and press
it again to turn off the backlight.
4.4 Mute function
Press on the transmitter to turn off the buzzer, then the buzzer would
not make a sound when any button is pressed; press the mute button again to turn off the
mute function of the trans mitter, and the buzzer function is recovered. Hold onto
on
the transmitter for 1 second to turn off the sound, and the
buzzer or the speaker of the
receiver would not make a sound; Hold on to
on the receiver for 1 second to turn off
the mute function,and the functions
of buzzer and the speaker of the receiver are recovered.
4.5 Auto power off function
If any button of the transmitter (or receiver) has not been pressed in 15 mins , the
transmitter (or receiver) would be automatically turned off. Please press the on/off
button to power on the transmitter (or receiver).
5. TECHNICAL PARAMETERS
Technical
parameters
of transmitter
Technical
parameters
of receiver
Your excellent helper in measuring instruments
.
Your excellent helper in measuring instruments
.