Now Technologies Gyroset Link, Руководство пользователя

Страница: 15 / 24

WARNING
The Omni can be put to sleep by selecting that option in the User Menu. To awaken the
Omni, the following SID sequence is required: Left, Right, Left, Right. Note, this waking
method only works if the Omni has been put to sleep via the User Menu. For that to
work “Sleep 12V” parameter has to be turned off to allow the GyroSet Link to operate
constantly. For a more safe operation of the chair Now Technologies doesn’t recommend
the above described scenario, rather please install a separate User button in the reach
of the User that can act as an emergency stop as well.
Please make sure that your R-Net configuration meets the following criteria:
• The correct SID port is configured as proportional.
• Sleep 12V parameter is set.
• User control is set.
• Drive, Acceleration and Deceleration settings are at a comfortable and safe level.
GYROSET LINK CONFIGURATION
In this document we presume that the user is already familiar with the usage of the
GyroSet Glory headset, for detailed instructions on how to use the headset please
follow the Headset’s User’s Manual.
The GyroSet Link translates the user’s head movements into analogue joystick
sweeps. For that to function correctly all GyroSet Link parameters must be set
according to the individual user’s needs. The configuration of the GyroSet Link can be
achieved through the Glory Tools application - available for all users - that provides
an interactive Help and settings Wizard, which you can find by clicking on the question
mark icon in the top right corner of the application of any page. The headset can
measure tilting of the head in the four main directions, forward, backward, left
and right.
15