Now Technologies Gyroset Link, Руководство пользователя

Страница: 18 / 24

• Centre mode and parameters must be set with Glory Tools:
• If the centre mode is on a countdown, timeout has to be set.
• The maximum speed, acceleration, deceleration of the head drive profile of the
wheelchair controller must be adjusted:
• Settings of the PGDT controller must be administered by PGDT trained and
authorised personnel.
• Acceleration and deceleration of the wheelchair shall not cause an inertia on the
users head that the user cannot compensate.
• Maximum speed must be always in correlation with the local regulations.
• The GyroSet Link shall be paired with the Users Personal Area Network.
• User password of the Personal Area Network must be changed frequently.
• The password must be chosen carefully, it should contain lower and upper case
letters, symbols and numbers.
• The password must be minimum 8, ideally 16 characters long.
• Service network must be used only for the time when changes are made to the
personal drive profile.
• The wheelchair can be driven in Service mode to allow fine tuning of the parame -
ters but Service mode shall not be used for regular drive.
• User network protected with users unique password is more safe and doesn’t
allow parameter settings online.
• The user should avoid:
• Environments with extreme radio interference when controlling the Link with the
headset wirelessly.
• Environments of extreme magnetic fields, such as MRI because these can dam -
age the onboard sensors.
• The user shall be aware
18