Novy 663/16, Инструкции по эксплуатации и монтажу, Страница: 20 / 28

EN 20
Reset the Monoblock recirculation filter:
The cooker hood (motor) must be running!
Simultaneously press + and – for 5 sec. until the
red indicator lamp flashes 3 times for confirma-
tion. If the programming is not carried out, the
programming is automatically set after the chim-
ney hood has been switched on 10 times.
Place the Monoblock recirculation filter:
• Open the bottom plate with both hands and
remove the aluminium grease filter from the
hood.
• Place the Monoblock recirculation filter is its
opening in the cooker hood.
• Put back the aluminium grease filter and close
the bottom plate.
Maintenance of the hood
Please allow the lights to cool down sufficiently
before cleaning the hood.
Use a soft, wet cloth and a mild detergent to clean
the hood.
Never use aggressive, abrasive detergents or
sponges. Bleach will damage stainless steel.
The stainless steel surfaces can be treated with
Novy Inoxcleaner (906.060) after cleaning.
Replacing the lamps
First, remove the power supply from the hood
and allow the lighting to cool down sufficiently.
1. Carefully press the spotlight holder; next, re-
move the spotlight holder by means of a tilting
movement.
Open de bottom plate and then loosen the
screws and slide the cover forward and down-
ward to loosen it from the cooker hood.
2. Removing the LED lamp:
A. First disconnect the cable to the LED to be re-
placed. Disconnect by means of releasing the
lock, by applying light pressure while at the
same time pulling away.
B. Next, remove the LED to be replaced by mak-
ing a gentle rotating movement to the left.
3. Mounting the new LED:
A. Place the new LED light into the locking ring.
B. Make a rotating movement to the right until the
LED light is locked.
C. Connect the power cable.
D. Put back the cover and tighten the screws.
Then close the bottom plate.