Novus NMS NVR 7XE-4U, Руководство пользователя

Страница: 17 / 96

NMS NVR X - 4U, NVR X - 2U/XX/R, NVR 7XE - 4U - 1.3 version - User ’ s manual
All rights reserved © AAT Holding S.A.
17
4. INSTALLATION, AND RUNNING DEVICE
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it from a
location with lower ambient temperature is forbidden, as the condensing water vapour may cause
short
- circuits and damage the device as a result.
To install the device place it in rack - mount and tighten the screws.
PC Keyboard and mouse connect to USB port. Connect the monitor to graphic card depending
on prefered cable and type of connector .
Integrated graphic card is unavailable. In case of using more than two monitors it is required to
use Display Port output for connection one of them. Another two can be connected to DVI or HDMI
port. Connect the LAN cable to ethernet port. Description how to change IP address is given in
chapter 6.4.1. After connection device could be launched. Set the power button to I , then press the
power button located at the front panel. Please wait until operating system starts and displays main
screen.
INSTALLATION, AND RUNNING DEVICE