NHDR
-
6004
-
H1, NHDR
-
6008
-
H1, NHDR
-
6016
-
H1, NHDR
-
6116
-
H2
User
’
s manual (Short) ver.1.0
All rights reserved © AAT Holding S.A.
12
STARTING THE DEVICE
2.4. Connecting monitor
The recorders have HDMI and VGA connectors.
Following resolutions are supported for HDMI output : 1280x1024, 1920x1080.
WARNING
:
Emergency switching of the screen resolution is possible after pressing the right mouse button
after more than 5 seconds until you hear a sound signal from the recorder.
2.5. Connecting camera and Network
AHD cameras should be connected by coaxial cable to BNC connectors of the recorder.
The maximum cable length between the recorder and camera depends on the quality of the cable and
the mode used.
The recorder requires the use of a switch to connect IP cameras. The permissible cable distance from
the switch to each network device is 100m. Cameras, Internet and other devices should be connected
as shown below. We recommend configuring the cameras before connecting to the recorder as
described in the camera user's manual. Please remember that the cameras should be addressed with a
unique IP address supported by the recorder. Connecting cameras and network devices to the recorder
Before configuring the connection of cameras in the recorder, we recommend using a PC to configure
the cameras in accordance with the camera instructions.
NETWORK
SWITCH
INTERNET
PC
NOVUS NHDR
IP CAMERAS
INTERNET
AHD CAMERAS