NHDR
-
6004
-
H1, NHDR
-
6008
-
H1, NHDR
-
6016
-
H1, NHDR
-
6116
-
H2
User
’
s manual (Short) ver.1.0
All rights reserved © AAT Holding S.A.
10
STARTING THE DEVICE
After removing the case, mount the disk using mounting screws supplied in the set (4 pcs.). And then
connect the power cord and signal.The recorder casing has 6 holes enabling adaptation to hard disk
mounting holes.
After connecting the hard drive mount the cover, start the NHDR to check and format the hard drive.
For the NHDR
-
6116
-
H2 recorder, unscrew the three screws on the back of the recorder housing.
After connecting the hard disk drive, mount the recorder housing and run it to check the correct
connections and format the hard disk drive.
After removing the casing, mount the disk using mounting screws (4 pcs.) For each disk mounted.
