Novus NDR-EA2104, Руководство пользователя

Страница: 24 / 108

NDR-EA2104 / NDR-EA2208 / NDR-EA2416 User’s manual ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
24
To update the firmware, please connect Flash type memory (containing a firmware appropriate for a
given recorder, in *.pkg format ) to the USB port and select
Update .
After the update window is displayed, a proper file needs to be selected and the whole update process
confirmed. In case of installation failure, an appropriate message will be displayed.
After firmware upgrade (that may last up to a few minutes), the device reboots automatically. Please do
not press any buttons either on a DVR or its remote controller during the update.
Note: Please consult your distributor prior to the firmware update.
Note: Power outage, turning the device off or removing the Flash memory during update may
result in damage to the DVR and a necessity of service repair.
Note: The producer isn’t responsible for any data loss resulting from firmware update.
Note: Update field may be inactive in case when there is no free disk space left to save the
temporary system files. To prevent this, please format the disk prior to the upgrade.
Remote Controller ID field allows for assigning a unique address to the DVR, utilised in case of
controlling the DVR via IR remote. Address ,ranging from 1 to 99 is assigned via
up - down
navigation buttons.
0 is the default address of the DVR, allowing instantaneous remote control via the IR.
Video type allows for selecting a desired television transmission standard: AUTO, PAL, NTSC
( AUTO mode is strongly advised).
Configuration
field allows for importing (
Import
) or exporting (
Export
) DVR settings, using USB
Flash memory, or for restoring factory defaults (
Default
).
Note: NETWORK and part of SYSTEM settings are skipped during the import and settings
restoring.
RECORDER’S MENU