Novus NDR-EA2104, Руководство пользователя

Страница: 11 / 108

NDR-EA2104 / NDR-EA2208 / NDR-EA2416 User’s manual ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
11
STARTING THE DEVICE
1. VIDEO IN: 4 video inputs for connecting video signal sources to the DVR .
Note: When using twisted pair cable counting several hundred meters in
length as a transmission medium and with low video signal strength,
small crosstalk may appear .
2. AUDIO IN: 4 audio mono inputs (RCA LINE IN type) for connecting microphones.
Note: Sound recording may be conducted only when legal regulations of
a given country allow for such activities.
3. NETWORK: RJ-45 connector for connecting the DVR to the computer network in
10/100Mb/s standard.
4. VGA: Main monitor connector, VGA type. Please use signal cable provided with
the monitor when using aforementioned connection type. VGA out works
simultaneously with the CVS video out.
5. CVBS : Main monitor connector, Composite Video Signal (CVS). CVS out works
simultaneously with the VGA video out.
NOTE !
DVRs feature independent display on two monitors simultaneously. Operating the DVR is possible
only from one monitor at a time. By default VGA monitor output is enabled. In order to switch output
from VGA to BNC or from BNC to VGA please fallow instructions below.
- press and hold the DISPLAY button on the front panel (or IR remote) for about 3 seconds
- click both mouse buttons at the same time
- select
Move Display Focus
position from the menu available after pushing right mouse button or
ENTER
.
Table containing options of independent dual display is presented on the next page. N/A description
means that the function can't be realized on the same time.
2.3.1 Electrical connection and other back panel elements of the NDR-EA2104 DVR
NDR-EA2104 view
1
2 3 4
5 6
7
8
9
10
11
12