Novus NDR-EA2104, Руководство пользователя

Страница: 20 / 108

NDR-EA2104 / NDR-EA2208 / NDR-EA2416 User’s manual ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
20
16. pressing the button in „live” or playback modes allows to enable digital
zoom function. Function becomes available only after switching a desired
channel into full-screen mode. In order to select a magnified area please use
navigation buttons.
17. pressing the button displays menu that allows to enable/disable the PIP
function. If enabled, picture from one camera is displayed in a small
window superimposed onto a picture originating from a different camera.
18. pressing the button in „live” or playback mode allows to select an audio
input (from active), which is then associated with output (built-in speakers).
19. Consecutive presses cycle between the following OSD display modes: none/
only date, time and camera information/status info bar, as well as hour and
date (additionally, a “hide bar” function after a certain period of inactivity is
available).
20. pressing the button displays menu that allows to set an ID address of the
DVR which is to be controlled.
2.7. Plugging in the power
Plugging in the power cable starts recorder operation. Device initialization takes about 30 seconds.
Functions shouldn’t be called and buttons pressed during this period. Turning the device off is
performed via menu.
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short-circuits and damage the device as a result.
Note:
Please get familiarized with description and functions of rear panel inputs/outputs.
STARTING THE DEVICE